I bought an electric fuel gauge. The sending unit is 1/8 npt male fitting... Inorder to mount this on the fuel rail I need a -4an female to 1/8 npt female adapter correct?
The stuff I've found for "schrader fuel fitting" are all like 20 bucks each, where the -4an are only $5.
blown transmissions are about as useful as 97% of the guys on this forum
Why do you want a schrader? Thats nothing but an AN male fitting with a valve core inside of it. If you could get a tee fitting with a 1/8'' npt fitting in the middle, that would easy.
[IMG]https://images.app.goo.gl/XLfskemekXBo5VfS7/IMG]
www.tjc.edu
what size an fitting is it? i was going to remove core, screw adapter onto rail, screw sending unit into adapter.
blown transmissions are about as useful as 97% of the guys on this forum
The aluminum fitting at the end... I need one of those, and can't find it anywhere. Just a straight fitting to go from my schrader valve (assuming its 4an female) to 1/8 npt female for my gauge setup.
blown transmissions are about as useful as 97% of the guys on this forum
that's the 20 dollar one I was trying to avoid lol. I can piece together russel fittings for about 18.
blown transmissions are about as useful as 97% of the guys on this forum
shoulda looked at mine the other day dude... id take the covers off to show you..
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
So we are looking for something cheaper than 18 bucks? Really? sure you can put a bunch of fittings together to make one but your just creating more potential for a leak even if they are an fittings. Caspers is like 13 bucks plus shipping i just ordered mine just to be done with it. I will pay 2 bucks difference to save from having the trouble of screwing everything together
EATIN' FORDS AND TUNDRAS
RIP 2005 VHO ecsb 6.0HO, Comp Cam, Nelson Tune, OBX LT's.
Posting Permissions
Reply With Quote
