Another Obs Ls Swap

[89sierra]

Hey guys been a long time lurker and collecting parts at the same time. So I will start off by giving a little backround info of My truck. The truck is a 1989 gmc sierra z71 stepside, that a guy in our marina had since 1995 I had always bugged him to sell me the truck but he kept saying he would never sell it. It then turned out to be a work truck and then he needed money so in 2008 I bought the truck from him for $500 to be used as a mud truck. The truck made it to one mud run and I decided i needed a project after that. So it all began with tearing the cab, box and everything off the frame. I then had all the suspension and frame redone and powder coated red. Every nut, bolt and bushing has since been replaced. the next step was to have the body re-done. it turned out that the cab needed new rockers and cab corners while in the process i cleaned the inside of the cab and had it rhino lined to seal everything up and mounted seat out of a 2006 denlai. so i replaced those and i also added new fenders as well. then for the motor i had just a basic 350 roller with some slight bolt ons and some mild head work. alot of my friends now have the nbs trucks and started doing some 6.0l swaps so i am not going to lie i jumped on the band wagon when i found a 2004 lq9 out of a silverado ss with 100 000km and 4l65e and awd transfer case for $800. the one downfall was the wiring had been cut and there was no computer. that was not a big issue since a guy that runs a speed shop around here had a carb set up on the same motor. i have stripped the motor down completely por15'd the block, bought the edelbrock 7118 intake and msd box and a 750 holley double pumper carb. I have bought a areomotive by pass regulator so i can still run my factory intank fuel pump since it is brand new and i have gone with the pace setter long tube headers. i have already pulled my transmission and driveline and disconneccted all the wiring and hoses going to my tbi motor. the only thing left is to pull the tbi motor out. i know you guys like pictures so i will post some of the truck. dont mind the dust i forgot to put the cover on it over the winter.
023.jpg008.jpg001.jpg018.jpg014.jpg

[89sierra]

well i guess you can only have so many pictures so here are some more

005.jpg007.jpg009.jpg011.jpg016.jpg

[bstill]

Wow, what a transformation. Truck looks real good. Good luck with the swap.

[Chevy-Art]

Nice gauge cluster and I like the red.

[1low94]

Hey man great job with the truck, It looks killer! Just wondering what kind of side mirrors you have on it I've never seen those before.

[89sierra]

thanks guys some love the red and some hate it. as to the gauge cluster that was a royal pain in my ass. finding all the wires from the stock wiring harness which did what and then running power and grounds for every light and gauge in there. the mirrors were a bad idea i found them on ebay and from the pictures they looked to be a decent size but when they arrived they were only 4". the other news is i have the motor out and sold it for 900 to another guy with a tbi. but i came to a complete hault last night when i went to put the ls into the truck. i bought the transdapt 4572 motor mount apapters and measured the centre hole on that and the centre hole on the tbi from the tranny housing face and the transdapt mounts move the motor back 1.5 so 14.5" from the tranny housing and the old tbi is right around 16" so what motor mounts should i get and what are the part numbers. the reason i went with the 4572 was because it was suppose to keep the motor in the stock location.

[Clayman]

Dirty dingo is what im getting... they're adjustable so u can stick the ls in the original place. (And use the original frame brackets) Alot of ppl on this forum and others have used them and they're specifically designed for this kind of swap!! Just go to dirtydingo.com and use the motor mount kit for 88-98 4wd trucks and blazers.

[89sierra]

thanks i ordered the dirty dingo mounts now i have to wait 6-10 business days plus 40$ shipping. god i hate living in canada some days.

[Clayman]

Yeah that's gotta suck sometimes!! its nice down in va tho... 1-2 business days for my motor and tranny to ship from Ohio!!! but 3-5 for most other parts!

[89sierra]

so my powder coated dd mounts showed up. they look really good. have any of you guys that have done the swap tried putting the motor in with the long tubes on or am i crazy for thinking of putting the headers on first? i want to have as much on the motor as possible but i am an hours away from my truck so i cant do any quick measurements.