my 93 S10 build

[nonnieselman]

My buddy put all new steering and control arm bushings and my QA1 coilovers on the front this past week, then we aligned the front end..

race mota is sittin in the truck as we speak...




























Goin to cut all the brackets off this Mustang 8.8" and build a 4 link for it. 3.55s and a Traklok Diff goin in it with all new bearings.






Got some paint and cleaned everything up and gave it a couple coats










with the 4.8 sitting in the truck






Should make a few more hampster powers than this lil 4.3

[nonnieselman]

Hope i have enough...





getting rid of any unneeded wiring

[nonnieselman]

Cammed 4.8L goin to have a crap ton of nitrous thru a stock TC/4L80E out of my silverado then thru the 4 linked 8.8" on 26" slicks

[sierraman]

nice setup, got any vids?

[nonnieselman]

its still got quite awhile before she fires up.. still got the whole fuel system to work out and all that fun stuff.. ill have more pics and some videos when its finished... even have a burnout video i promise!!

[Jonce]

Looks good man, I'm sure you will be grinning ear to ear on the first drive.

[nonnieselman]

once i make sure everything works like its suppose to im goin to start with a single 75 shot and work it up to the 3 kits

[CHEVROLADE]

damm nice project

[nonnieselman]

thanks..

i was putting valve springs in this past weekend and one of them decided to slip out of the tool and the retainer or spring caught me 1/4" from my eye..
So this weekend ill finish the springs with a face sheild and another spring tool

Headers were delivered yesterday, so ill be able to do a little more this weekend. along with boxing the Kmember where i trimmed it.

Hoping my FLT LVL4 80E will be shipped soon so i can get it in the silverado and the stock 80E in the S10...

Still have to build the 4 link, so i got alot of work to do.