Forum: DynoData

I dyno'd my silverado with a only a muffler swap at a local speed shop. I posted this info in my newbie thread but I figured I'd add it here, where...

I have a 01 sierra c3 which is awd. I had a custom tune done to it. On my dyno data sheet its showing surging spikes on my curve for torque and hp. ...

This is my 6.2 crew cab dyno numbers just dyno tuned it finally on tuesday custom grind cam 4l80e 3800 stall 4:10s THE FIRST ONE IS A VIDEO

seems a little low? lower hp/tq numbers were before tuning it on the dyno it was about 90 degrees in the shop so that could have played a...

So, lately my dyno has been reading a little low, lower than Superflows actually read, so I contacted SF tech dept and asked them what they thought....

Here is a video of this setup on the local Dynapak putting down 701rwhp. And also a clip of it running 10.3 @ 135 which backs up the numbers. Car...

Foxbody with built 6.0 shortblock, stock 317 heads, and edelbrock intake. It made 750rwhp at the local DYNAPAK on 16psi. Its been mid 9s @ 145mph...

Another local on the dynapak making some pulls. The setup ended up making 838rwhp and ran a 8.68 @ 153. Tony is the fastest LTX nitrous car...

I ran a few common cams in desktop dyno today. If anyone has a similar cam post up your dyno results. This is on a stock 5.3 with headers. Comp...

Went to the dyno yesterday to get the blazer dyno tuned after I picked it up front the exhaust shop. Swap was completed the day before. MOTOR IS...

what was the outcome? or he not do any dyno's? i would luv to have taken advanage of the free dyno :(

Got on the ol dyno today... 324/315 Power Mods: Longtubes, ORY, 220/224 cam, tune, cai, magnaflow muffler, single 3" exhaust

2009 gmc sierra 1500 5.3 LH6 with 6l80e 6 speed transmissions 4wd specs: AIRAID cold air intake OBX long tube headers+ catless Y pipe custom 3"...

Another friend of mine with a 86 Fox with a stock bottom end LS1. Ported 243's, MS4, Ported FAST90, and a 200 shot on a plate. Car weights about...

Here is the latest dyno data. I only made 446 rwhp and 521 rwtq :grr:. I was having issues with the boost controller so the boost peeked at 14psi for...

Nick is a friend of mine that i've done a ton of work to his cobra. It has a built 5.0 and a Billlet wheel PT76 on it. We had a chance to strap it...

Well after a few upgrades Flaco took my truck to the dyno today and here are the results 871 RWHP@14lbs of boost click on bottom picture for...

I know you guys have been asked this qeustions until your blue in the face but maybe one more time. I have a brand new LQ-9 with dynatech longtubes...