Forum: Powertrain

I'm considering running one of these for my 6.0L build http://www.summitracing.com/parts/SLE-55000/ The kit comes with spacers to clearance...

How do I get the damn thing off without buying a puller?

after blowing the 2nd 60e with only 18k miles on my 08'....time to upgrade. im going by Allens and Red Heartbeats threads on the how...

I just got off the phone with revmax. I was interested in them because I'm broke right now and I need to get a cheap stall to complete my 4l80e swap....

i supposed to pick up a 04 5.3 sunday. its missing cam, lifters and intake. Supposed the roller on the lifter locked up and took a cam lobe out with...

This morning did a 2-3 shift on only 6 psi. It acted like it popped it into neutral. Everything seems fine now driving it normal. Just a fluke thing...

well i just purchased a 99 1500 4x4 with 128k miles. pretty stoked about it. i bought it will a trashed transmission. i consider the truck to be...

OK I need some help/advive/info ASAP and Id appreciate it so much! Im doing the LS1 swap into my 06 gmc as we speak and Ive ran in to a little...

Since I have a 04 could I step up to 07 Silverado brakes by swapping the caliper/bracket and rotor on the front? Just looking for to verify. details...

alright im working on the 5.3 for my swap in my thirdgen and iva got the cam swaped and need to do the springs and i have a question. will a pancake...

I'm installing the 4l80e hd2d kit in my trans. I'm having trouble getting the damn pump off. How does it come off? I tried using two 7" long bolts...

Maybe a stupid question but I want to make sure I get this one right. I have an 05 6.0L and what are the part #'s for (1) ARP rod bolts, and (2) ARP...

Just wondering if you guys know wether or not you can remove the oil pan from an 01 2500hd 4x4 with Lq4 without droping the fron diff? Looks like...

Just wondering if anyone has any advice/experiance with adjusting your stock lifter preload? Currently stock Lq4 with consistant inconsistant lifter...

I am wondering what rpm you guys are at. Post you tire size and rearend ratio. If possible post what 4l80e you have. I heard that the 80e behind the...

I'm just wondering if the stainless headers listed on eBay by Speed_Daddy are the ones which everyone talks about? I see they are listed for trucks...

new to the forum...this site is sweet iv been reading so much on here the past few days :rock: i recently found a lq4 at a junkyard from intake to...

This may be a dumb question. BUT here it goes. On the oil pump where the pump meets the block is that a machined face so that there is no need of a...

OK I'm wanting to upgrade to an 80e but can't afford it at the moment. my truck is an 05 crew cab 5.3 with just headers, tune, 3.90 gears, 3inch...

I just purchased a 2003 4l80e for my 2007 nnbs 1500 ccsb. I picked up a transgo hd2 for it and I was going to install the kit before i installed the...