Forum: Powertrain

SO this is a mod im thinking about in the distant future, truck is 01 cc 4x4 with the 6.0 I know it has the 317 now, and have heard about the 243...

Whats the best way to de-code a vin number? I have a 06 SSS and want to verify the rear end ratio. I suspect there 373's but I need to make sure....

Been calling around found a shop that will completely rebuild my tranny with performance stuff. (Basically the same set up as a flt lev 3). Put in a...

Well i replaced my fuel pump last week thinking that would help my problem with my truck. With the fuel pressure messing up ect. I have not been...

How do you put in a vette servo? What does this do to your transmission? I see everyone has one, just curious. I was just in craigslist and a guy is...

Accidently threw the instructions away while cleaning my garage....at least I think I did cause i cant find them. Called Transgo several...

I made some changes to my setup and the air box normally pulls air from both sides but i made a fibreglass bottom for it.Intake temps tonite were 6...

Hey guys, I changed out my cam today to my old stock ls6 cam after i got it back from specing. Just because i changed out my cam so many times and...

It seems ever since I installed the 4.56 yrs ago I've had a driveline vibration. With my old 383/700r4 and driveshaft it was always bad around...

where the F do I buy one. Found some timken bearings, but not in a "kit" with seals and everything. There is some other brand universal kit, but I...

Okay, on my way home today and apparently the A/C belt shredded, which in turn threw the main belt. Couldn't pull over for a mile or so...by then...

i cannot figure out why this code will not go away. i have an 02 2500hd with the 6.0. it has a comp cam (p/n 54-451-11), comp cam programmer, 3" dual...

Ok guys heres my problem. My truck has pretty much been sitting since spring time, though I've been working on it a bit. Well I got my Gto and I...

i was wondering if anyone knew which cam would be best for my setup. i have all of the mods listed below. i saw the cam in the 100 hp and wasn't sure...

Since my truck was broken into and the pass. door handle destroyed, its in need of a replacement. I can find factory replacements that have been...

I just bought a Servo "set" from Ebay(item#330273138451) with a Corvette Servo(with extra heavy duty accumulator spring) and Sonnax Billet 4th gear...

does anyone know of a place to get taller valve covers for an lq9 or even spacers to make high lift roller rockers

Hey all, Its been a while, after loseing interest in my truck I let it sit for a while, Now I'm beginning to finsh it up. My truck had the...