Forum: LSX Truck Conversions

I would like to put 6.0 in my 96 xcab. Which one would work best? I want to add cam, headers and possibly a turbo later on. Should I start with LQ9...

Dropped the mock block in place and everything fit perfect! I have one minor mod to make on the A/C bracket and the new motor's going in. I put...

Its that time. Ready to order a harness today. Im leaning toward Allens harness from Nelson performance. Allen says ditch the 98 pcm and use a 99-02....

Well i have had my motor for a couple months now just sitting in my shop. I have a few questions Where would be the best place to buy a gasket set...

What would I expect from my 5.3 ltr. with Intercooled vortec supercharger with 7.5 lbs boost & 27psi injectors.

Anyone know of a bracket to relocate the compressor to the top w/o buying a new compressor. I know Street & Perf. sells their compressor and bracket,...

So the needling part of the install which has given me trouble. The tach does not work....well, its not accurate is the better description. I'm...

I finally got the frame mod completed today and painted. Here's some pics of the fabrication and the stainless motor mount adapters I made...

I'm wanting to swap to a 6.0 within the next couple weeks/months. I'm not sure what the simplest option would be. Should I buy the stock longblock....

Im looking for someone or a company to wire up my ls1 in my 1995 ext cab is there anyone around or near the atlanta. ga area that could handle...

Sorry for reposting most of this information, but I need some help. I am starting to corrall all the parts to start the swap. I have seen the parts...

Here's a truck that came through a while back, did some wiring and tuning on it. He wanted me to get it on the net for him. Watch out for it if...

I finally wrote something up about my LQ9 engine and 4L80e transmission in my 95 K1500. Here's the link: ...

IM a turbo guy, I know nothing about the inside of a 4l60E. :cry: I need to know how to replace the shift solenoid's. I was told just drop the pan...

I just clicked over 100k in my 94 z71. Currently it has an all stock 350 TBI, stock 4l60e, 10-12" cognito motorsports lift, 38" toyo MTs, 4.88s,...

what happened to the sticky with all the info on the V6 to V8 swaps along with part numbers and such .... I needed to get a number and it's gone ... ...

After your manifolds/headers...What does the rest of your exhaust system consist of? Both header pipes into one muffler or two separate mufflers?...

Alright, I am about finished gathering parts for a 5.3/T56 conversion into a '92 SWB 2WD truck. The questions I have that I can't seem to find a...

i want to use the vortec 6.0L to swap out in my S-10 truck but will the intake clear the hood?

The truck is running smooth now. But' will not shift. Ya'll where right, it has to be starting out in 2nd or 3rd gear. It was hard to tell since I...