I recently tinted my rear tail lights, In order to be able to see them during the day I installed some led bulbs in them. The brake lights work perfectly, but when i use the turn signal the lights blink extreamly fast, but work as normal with regular bulbs. I got pulled over and was given a warning about the lights blinking too fast. So what can be done to slow down the turn signal speed.
My Ride: 2006 Chevy Vortec Max, LQ9, 4X4, no cats, 50 Series Flowmaster in factory pipe, 20"s, C.A.I., Custom tune by Dustin at TRT Performance
They pulled you over for it blinking too fast??Originally Posted by 06BLACKMAX
That's just plain dumb! I guess that's what happens in the town of the Ezekiel Airship!! Sorry, I can't help you with your problem.
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
Thats nothing a buddy of mine got pulled over for excessive braking!!! The SOB's around here are the super cops of super cops.
My Ride: 2006 Chevy Vortec Max, LQ9, 4X4, no cats, 50 Series Flowmaster in factory pipe, 20"s, C.A.I., Custom tune by Dustin at TRT Performance
I thought blinking too fast meant you have a blown bulb.
When I drove mine without the bed the signals went real fast.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
That's the most ridiculous thing I've ever heard of. They must not have a lot to do if they are pulling people over for that!! Sorry to jack your thread.
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
No problem.
"I thought blinking too fast meant you have a blown bulb.
When I drove mine without the bed the signals went real fast."
Yes, that is true. But all of the lights are working. Just blinking really fast.
Where is RedHeartbeat at when you need him??!!
Last edited by 06BLACKMAX; 09-18-2007 at 05:16 PM. Reason: Added question
My Ride: 2006 Chevy Vortec Max, LQ9, 4X4, no cats, 50 Series Flowmaster in factory pipe, 20"s, C.A.I., Custom tune by Dustin at TRT Performance
you are correct the lighting system is drawing (less) current and the truck does think a bulb is out, find a resistor
go to Radio Shack and get the individual resistors.
Remember to get the higher wattage resistors, so you don't smoke them
Last edited by shakesvho; 09-19-2007 at 11:43 AM.
Led lights actually draw less power. You need to get a flasher made for leds.
Grote Industries: Flashers and Turn Signal Switches
LED Flasher FAQ
Thanks man!! Got one on the way.
My Ride: 2006 Chevy Vortec Max, LQ9, 4X4, no cats, 50 Series Flowmaster in factory pipe, 20"s, C.A.I., Custom tune by Dustin at TRT Performance
or just wire in a dummy bulb somewhere that isnt seen to use up some of the voltage for the flasher.
Posting Permissions
Reply With Quote
